Xiangtan Shenzhou Special Cable Co., Ltd
Xiangtan Shenzhou Special Cable Co., Ltd
Add to Cart
250C high temperature Insulated Silver Copper Wire, High Temp PTFE Coated Wires
PTFE insulated equipment/ hookup wires are generally used for internal wiring of various electronic and electrical equipments and other electrical purposes. They are most suitable to use in equipments involving for high frequency signals. Uniformity of insulation thickness around the conductor and very low dielectric constant of PTFE enables the transmission of high frequency signals with minimized signal losses as compared to other wires resulting in high quality signal transmission.
.
Features:
1. High temperature resistance
2. Cold resistance
3. Good softness
4. Aging resistance
5. Anti-interference
6. Easy insulation stripping
7. Small diameter
8. Especially suitable for frequent bending occasions
Properties:
1. Rated voltage: 125V, 300V, 600V
2. Working temperature: -65Degree ~ +250Degree
3. Conductor: Silver Stranded Copper Wire
4. Insulation: Ptfe high temperature insulated
5. Colors: Blue, Red, Yellow, White, Black, Brown, Grey, Green, Purple...
| Silver coated copper conductor PTFE insulation lead wire |
| Silver coated copper conductor PTFE insulation shield lead wire |
| Silver coated stranded copper conductor PTFE insulation shield lead wire |
| Silver coated stranded copper conductor PTFE insulation twisted shield lead wire |
| Nominal Section (mm2) | Conductor Construction | Insulation Thickness (mm) | OD (mm) | D.C. conductor resistance at 20ºC(Ω/km) | |
| Tinned copper | Silver coated copper | ||||
| 0.05 | 10/0.08 | 0.3 | 0.9 | 383 | 370 |
| 0.06 | 7/0.10 | 0.3 | 0.9 | 348 | 339 |
| 0.08 | 7/0.12 | 0.3 | 0.96 | 286 | 280 |
| 0.1 | 7/0.14 | 0.3 | 1.02 | 157 | 150 |
| 0.12 | 7/0.15 30/0.07 | 0.3 | 1.05 | 152 | 145 |
| 0.14 | 7/0.16 19/0.10 | 0.3 | 1.08 | 136 | 130 |
| 0.15 | 30/0.08 | 0.3 | 1.1 | 111 | 105 |
| 0.2 | 7/0.02 19/0.12 | 0.3 | 1.2 | 87 | 82 |
| 0.35 | 19/0.16 | 0.3 | 1.4 | 57 | 54 |
| 0.5 | 19/0.18 | 0.3 | 1.5 | 40 | 37.5 |
| 0.8 | 19/0.23 | 0.32 | 1.79 | 24 | 23 |
| 1 | 19/0.26 | 0.35 | 2 | 21 | 20 |
| 1.2 | 19/0.28 | 0.45 | 2.3 | 19 | 18 |
| 1.5 | 19/0.32 | 0.45 | 2.5 | 13 | 12 |
| 2 | 19/0.37 | 0.45 | 2.75 | 10 | 9 |
| 2.5 | 37/0.30 | 0.55 | 3.2 | 8 | 7 |
| 3 | 37/0.32 | 0.68 | 3.6 | 6.8 | 6.4 |
Noted: Specification and core no. are not limited to above regulation, they could be customized.
